TC-S
The TC-S is a roll-fed thermoforming machine. It has four stations: heating, thermoforming, transversal cutting and longitudinal cutting.
General Features
- Operates with plastic rolls. It has an automatic roll unwinder.
- Continuous and automatic cycle.
- The film transport is made by servo-motor. It has two pin chains with double link to transport the film all over the machine.
- Manual film width adjustment by means of centered spindles. Film stretching possibility in the transversal direction by adjustment of the distance between chains.
- Ovens made with infrared irradiation elements. standardized with easy maintenance. The ovens are built with stainless steel . They have design to absorve thermal dilations and built to save energy.
- Heating distribution by using several heating zones in the oven. Has 8 heating zones.Individual control of the temperature of each heating zone with PID.
- Plug assist equipped.
- Centrifugal high-flow blowers with low noise
- Vacuum system made with high-pressure and flow vacuum pumps and large vacuum tanks.
- Compressed air to take out the thermoformed part from the mold.
- Rotary-driven knives to do the longitudinal cut of the part.
- Guillotine to do the transversal cut of the part.
- High performance and big capacity PLC. Has control of: heating zones, times. alarms, several configurations, part counters and many other parameters.Has parameter memories for more than 100 molds
- Touch screen human machine interface with 5.7".
- Machine with operator safety items
- It has fire safety system to avoid plastic burning.
- First-class components produced by international companies.
- This machine's project is made with parameters to allow it to be custom-made for each customer application.
Besides the choice of molding area, the TC-S can be equipped with the following optional items:
- scrap cutter
- Inferior oven.
Eletro Forming supply operation and maintenance manual, electrical and pneumatic plants and component list for easy maintenance.
One year warranty for all parts and components.
Technical Features
| TECHNICAL FEATURES / MODEL | 23,6 X 31,5 | 47,2 X 31,5 |
| Plastic types | PS, PET, PVC and PP (with optionals) | |
| Plastic thickness (in) | 0,004 until 0,05 | |
| Productivity (cicles/min) | 17 until 35 | |
| Maximum molding area (in) | 23,6 X 31,5 | 47,2 X 31,5 |
| Maximum molding (in) | 5,5 | 5,5 |
| Dimensions (L) x (W) x (H) (in) | 275,6 x 82,7 x 98,4 | N/A |
| Maximum roll diameter (in) | 39,37 | 39,37 |
| Approximate weight (lbs) | 5500 | N/A |
| Oven power (KW) | 35 | 70 |
| Motors power (KW) | 8 | 8 |
| Electrical consumption (KW) | 15 | 30 |
| Compressed air consumption (l/cicle 8 bar) | 45 | 90 |